Template Tuesday - Gift Card Holder

 

Don't mind my sad little template I made for this week's Template Tuesday *lol* I will be posting the video on Thursday of a finished product!!!! 

Don't forget to follow & subscribe on YouTube Follow on Facebook: Shop with Me: #templatetuesday#cardmaking#stampinup#stampinupgiftcards

Graduation Cap - Gift Card Holder

 

The picture does not do this gift card holder justice... It looks like it's off center, but I promise you it's not. I love making it. However, my tassel on the top of the card is another story!! *lol*... I'm still taking orders as well... Message me or email, if you'd like some grad cards!!

Supplies

Starry Sky Card Stock - I# 159263
Cut 4 1/4 x 9 7/8

Scored at 5 1/2 on the long side

Turn your card up so the 4 1/4 side of the scored line is the top and the bigger side of the score is at bottom.

Take a ruler and measure across the top of the 4 1/4 and make a tik mark with your pencil at

2 1/8.

Go down to the score line at 5 1/2 and measure up 2 1/8 with ruler and make a tik mark. Do it on the opposite as well. I drew a line from point to point.

Cut from the 2 1/8 mark on the side to the 2 1/8 mark at the top center on both sides of the paper forming the point.

Go down to the score line at 5 1/2 and measure down 2 1/8 with ruler and make a tik mark. Do it on the opposite as well.

Using the scoring blade go down from the 2 1/8 on the right side across and up to the corner. Do the same thing on the opposite side - making a big, scored x.

Using bone folder fold the point down and the sides in - making sure to line them up.

Measure 21/8 across and down to find the middle of the cap. Use your take your Pic tool and your piercing matt to make a hole. I used a black brad & Linen thread to make a tassel.

Take Your Pick Tool - Item#144107

Stampin Pierce Mat Item # 126199

White Linen Thread

Black Brad

Graduation DSP - Amazon

Cut 2 3/4 x 2 3/4

(I changed this from the video and added gold behind the basic white)

Gold Foil Sheets - Item# 132622

Cut 2 3/8 x 2 3/8

Basic White Cardstock - I# 166780

Cut 2 1/4 x 2 1/4

Graduation Stamps - Amazon

Starry Sky Stamp Pad - I# 159212

Graduation DSP - Amazon

Cut 5 1/4 x 4

(I changed this from the video and added gold behind the basic white)

Gold Foil Sheets - Item# 132622

Cut 3 5/8 x 2 5/8

Basic White Cardstock - I# 166780

Cut 3 1/2 x 2 1/2

Graduation Stamps - Amazon

Starry Sky Stamp Pad - I# 159212

Tear & Tape - I# 154031

Shop with me

Subscribe & follow on YouTube

Follow on Facebook

Email: dharmon893@gmail.com

Gift Card Holder / Treat Box - Valentine

 You guys... This is so stinking cute and so fun to make. Spoiler Alert - I'm making these for the littles for Valentines. You wouldn't have to make the gift card holder and just use as a base that way you could use as a great treat for a class from a teacher, from a child to their class, for birthday party favors. And can you imagine all the different ways to dress it up for other holidays!!!

Love, Love, love.

Here is the list of supplies you will need:

Supplies

Real Red Cardstock - I# 102482

Cut 5 1/2 x 9 3/4

On the 9 3/4 side - Score at - 2 3/4, 5 1/4, 6 1/4, 7 1/4, 8 1/4, 9 1/4 inches

On the 5 1/2 side - Score at 1 and 4 1/2 inches

Window Sheet - I # 142314

Cut at 3/4 X 3 1/4 inches

Bee My Valentine Stamp Set - I# 162547 

Gnome Dies - I# 159625

Be Mine DSP - Gnome Hat - I# 162546

                                       Basic White Cardstock - I# 159276

                                                Cream Colored Cardstock  

                                        (I used Bazzil in my personal stash) 

   

                                          Basic Black Cardstock - I# 121045

  Real Red Classic Ink- I#147084

Stitched Rectangle Dies - I # 151820

Order Supplies Here

DIRECTIONS :

1. Fold on all of the score lines. Cut off the two long skinny rectangular areas on each side, and the two small rectangles on each side, keep the four squares on each side. 

2. Cut on each square cut on the score line up to the intersecting score line and stop.

3. Using the long narrow Stitched Rectangle Die, cut a window in the 2nd panel (or, if you count the

bottom tab, the 3rd panel). 

4. Place a Mini Glue Dot on each end of the Window Sheet, place it in the window opening.

5. Remove the Tear & Tape backing and fold the two larger panels together to form the pocket for the gift card. With the 1 1/2" Circle Punch, punch out a finger notch through both pieces of cardstock.

Hershey Kiss Gift Box and

Gift Card Holder

6. Put tear and tape on the tab end - peel off backing, fold over and attach

to the back of the card. 

6. Place a piece of tear and tape on one square at one end. Pull the backing off, fold in all the squares with the Tear & Tape one last. Do not glue the other end.

7. Fold in the open ends of the box and adhere with tear and tape or adhesive.

Pop Up Gift Card Holder - A Little Latte - Stampin UP

 This gift card holder is super fun to make. I used our " A Little Latte DSP" from Stampin Up. This would be great for a teacher gift, a thank you, birthday gift. I can't wait to make them for Christmas as well.

Supplies Needed

Pecan Pie Cardstock - I# 161717 

Cut 10 x 4 1/4

Scored @ 3, 4, 5, 8 inches

(INSIDE GIFT HOLDER) 

A Little Latte DSP Cut - I# 163453

1 3/4 x 4 

 2 3/4 x 4 (2 of these)

  A Little Latte DSP Cut - Different Pattern - I# 163453

1 x 4 1/4 (2 of these)

Pecan Pie Cardstock - I# 161717

Cut 2 x 3 1/2 (2 of these)

Basic White Cardstock - I# 159276 

Cut 1 3/4 x 3 1/4 (2 0f these) 

Blending Brush - I # 153611

Pecan Pie Ink # 161665

Latte Love - Photopolymer Stamp Set - I# 163455

Sentiment - thanks so much (Stamped off)

Coffee Beans - (Stamped off) 

Pecan Pie Ink # 161665

Outside of the Card 

A Little Latte DSP Cut - I# 163453

1 3/4 x 4 

 2 3/4 x 4 (2 of these)

A Little Latte DSP Cut - Different Pattern - I# 163453

1 x 3 3/4 (Cut 2 of these) 

A Little Latte DSP Cut - Different Pattern - I# 163453

2 1/2 x 1 1/2

2 1/2 x 2 3/8 

Belly Band

Pecan Pie Cardstock - I# 161717

Cut 9 1/4 x 1 

White Card Stock Basic White Cardstock -  I# 159276 

Latte Love - Photopolymer Stamp Set - I# 163455

(Coffee Cups) - Reverse Stamp Stamped in 

Petal Pink Classic Ink - # 147108

Colored with 

Petal Pink Stampin Blends - # 154893

Coffee in Cups - Stamped in 

Pecan Pie Ink # 161665

Latte Love Dies - # 163460 - (Cut Cups Out)

Misc. Supplies Used

Silicone Craft Sheet - I# 127853

Tear & Tape Adhesive - I# 154031

Adhesive Backed Swirl Dots - I# 163464

SHOP WITH ME

WATCH VIDEO HERE: 

Valentine - BEE Mine DSP - Video # 2 - Valentine Gift Card Holder

 I absolutely love this little gift card holder.  It's super easy to make and super cute.  

 

SHOP WITH ME

LIST OF SUPPLIES:

Basic White Card Stock # 159276

BEE Mine DSP # 162546

Bee My Valentine Photopolymer Stamp Set #162547

Sweet Sorbet Ink # 159216

Adhesive Backed Hearts and Flowers # 162557

Velcro Dots - Amazon Product

BEE MINE Suite # 162560

(BEE Mine DSP Paper, Bee Builder Punch, Ribbon, Stamp Set, Adhesive Backed Hearts & Flowers and The Pillow Boxes -Treat Boxes)

(Ink Pads not Included)

WATCH ME: